IntelCAD Data Processing Agreement

Version 1.0 · Effective date: 26 October 2026 · Last updated: 26 October 2026

This Data Processing Agreement (the "DPA") forms part of the agreement between IntelCad FZ-LLC, a Free Zone Limited Liability Company licensed by the Ras Al Khaimah Economic Zone (RAKEZ) under licence no. 47035899, registered at CWEP6703, Compass Building, Al Shohada Road, Al Hamra Industrial Zone-FZ, Ras Al Khaimah, United Arab Emirates ("IntelCAD", the "Processor"), and the customer that accepts the Terms of Service or signs an order form with IntelCAD (the "Customer", the "Controller"), together the "Parties". It applies when IntelCAD processes Personal Data on behalf of the Customer in providing the Services. It applies automatically when the Customer uses the Services as a business or organization, and is incorporated into the Terms by reference. No signature is required, but the Parties may countersign a copy on request.

1. Definitions

  • "Applicable Data Protection Law" means the data protection and privacy laws that apply to the processing of Customer Personal Data under this DPA, including, as applicable, the UAE Federal Decree-Law No. 45 of 2021 on the Protection of Personal Data, Regulation (EU) 2016/679 (GDPR), the UK GDPR and Data Protection Act 2018, and the California Consumer Privacy Act as amended (CCPA).
  • "Customer Personal Data" means Personal Data contained in Your Content (as defined in the Terms) or otherwise processed by IntelCAD on the Customer's behalf through the Services.
  • "Personal Data", "Processing", "Controller", "Processor", "Data Subject", "Supervisory Authority" have the meanings given in Applicable Data Protection Law. "Controller" includes "business", and "Processor" includes "service provider", under the CCPA.
  • "Personal Data Breach" means a breach of security leading to the accidental or unlawful destruction, loss, alteration, unauthorized disclosure of, or access to Customer Personal Data.
  • "Subprocessor" means any third party engaged by IntelCAD to process Customer Personal Data.
  • "Standard Contractual Clauses" or "SCCs" means the standard contractual clauses approved by the European Commission in Decision (EU) 2021/914, and "UK Addendum" means the International Data Transfer Addendum issued by the UK Information Commissioner.

2. Roles and Scope

2.1 The Customer is the Controller (or a Processor acting for another Controller) of Customer Personal Data, and IntelCAD is the Processor (or Subprocessor).

2.2 IntelCAD processes Customer Personal Data only to provide the Services under the Terms and this DPA. The subject matter, duration, nature, purpose, categories of Personal Data, and categories of Data Subjects are set out in Annex I.

2.3 For Personal Data of account holders, billing contacts, and website visitors that IntelCAD processes for its own purposes (for example account administration, billing, and security), IntelCAD is an independent controller, as explained in the Privacy Policy. This DPA does not apply to that processing.

3. Customer Instructions

3.1 IntelCAD will process Customer Personal Data only on the Customer's documented instructions, which consist of the Terms, this DPA, the Customer's configuration and use of the Services (including role settings and AI feature use), and any further written instructions that the Parties agree are consistent with the Terms.

3.2 IntelCAD will notify the Customer if it believes an instruction infringes Applicable Data Protection Law, and may suspend the instruction until the Customer confirms or changes it.

3.3 The Customer is responsible for having a lawful basis for the processing, for giving required notices to Data Subjects, for the accuracy and legality of Customer Personal Data, and for not uploading categories of data that the Terms do not permit (including special category or sensitive data, unless agreed in writing).

4. AI Processing and No Training

4.1 When the Customer uses AI features, IntelCAD may send prompts, design data, and context to AI model providers that are Subprocessors, solely to generate and return outputs.

4.2 IntelCAD will not use Customer Personal Data or Your Content, including prompts and outputs, to train, fine-tune, evaluate, or otherwise improve AI models, and will not permit AI Subprocessors to do so, unless the Customer gives separate, explicit written permission.

4.3 AI Subprocessors may retain prompts and outputs only for the limited purposes of providing the service, preventing abuse, and complying with law, and for no longer than 30 days.

5. Confidentiality and Personnel

IntelCAD will ensure that persons authorized to process Customer Personal Data are bound by written or statutory confidentiality duties, receive appropriate data protection training, and have access only to the extent needed to perform their duties. Access to Your Content by IntelCAD personnel is limited to the situations described in Section 5 of the Privacy Policy, is role-based, requires a documented business reason, and is recorded in audit logs.

6. Security

IntelCAD will implement and maintain technical and organizational measures appropriate to the risk, as described in Annex II. IntelCAD may update these measures over time, provided that the update does not materially reduce the overall level of protection.

7. Subprocessors

7.1 General authorization. The Customer gives IntelCAD general written authorization to engage Subprocessors. The categories of Subprocessors in use at the effective date are listed in Annex III, and a named list is available on request at bd@team.intelcad.ai.

7.2 Changes. IntelCAD will give the Customer at least 30 days' notice (by email or in the product) before adding or replacing a Subprocessor. The Customer may object in writing on reasonable data protection grounds within that period. If the Parties cannot resolve the objection, the Customer may terminate the affected Services and receive a pro-rata refund of prepaid fees for the remaining term.

7.3 Obligations. IntelCAD will bind each Subprocessor to written terms providing at least the same level of data protection as this DPA and remains responsible to the Customer for each Subprocessor's performance.

8. International Transfers

8.1 The Customer authorizes IntelCAD and its Subprocessors to process Customer Personal Data in the United Arab Emirates and in other countries where they operate, provided a lawful transfer mechanism applies.

8.2 Where Customer Personal Data subject to the GDPR is transferred to a country without an adequacy decision, the Parties agree that the SCCs apply and are incorporated into this DPA as follows: Module Two (Controller to Processor) or Module Three (Processor to Processor) as applicable; Clause 7 (docking clause) applies; in Clause 9 Option 2 (general authorization) applies with the notice period in Section 7.2; the optional wording in Clause 11 does not apply; in Clause 17 the law of the Member State of the Controller's establishment (or, if it has none, Ireland) governs; in Clause 18 the courts of that Member State (or Ireland) have jurisdiction; and Annexes I to III to this DPA serve as Annexes I.A, I.B, II, and III of the SCCs.

8.3 For transfers of Customer Personal Data subject to the UK GDPR, the UK Addendum applies and is incorporated, with the tables completed using the information in this DPA and the SCCs.

8.4 For transfers subject to the UAE Personal Data Protection Law, IntelCAD will apply the safeguards required by that law and its regulations, including appropriate contractual or other approved safeguards where the destination does not provide an adequate level of protection.

8.5 If a transfer mechanism is invalidated or replaced, the Parties will cooperate in good faith to adopt an alternative lawful mechanism.

9. Assistance

9.1 Data Subject requests. IntelCAD will, taking into account the nature of the processing, provide reasonable assistance, including through product features such as export and deletion, to help the Customer respond to Data Subject requests. If IntelCAD receives a request directly from a Data Subject about Customer Personal Data, it will direct the person to the Customer and will not respond except as instructed or required by law.

9.2 Impact assessments. IntelCAD will provide reasonable assistance with data protection impact assessments and prior consultations with Supervisory Authorities that relate to the Services, taking into account the information available to IntelCAD.

9.3 Assistance beyond the Services' standard functionality may be charged at IntelCAD's reasonable, pre-notified rates where the law allows.

10. Personal Data Breach

10.1 IntelCAD will notify the Customer without undue delay, and in any event within 72 hours, after becoming aware of a Personal Data Breach affecting Customer Personal Data.

10.2 The notice will, to the extent known, describe the nature of the breach, the categories and approximate number of Data Subjects and records concerned, the likely consequences, and the measures taken or proposed to address and mitigate it. IntelCAD will provide further information as it becomes available.

10.3 IntelCAD will take reasonable steps to contain and remediate the breach. Notice of or response to a breach is not an acknowledgment of fault or liability.

11. Audits and Information

11.1 IntelCAD will make available the information reasonably necessary to demonstrate compliance with this DPA, including summaries of its security practices and, where available, third-party audit reports or certifications relating to the Services and its Subprocessors.

11.2 Where that information does not reasonably satisfy a legal audit requirement (including one imposed by a Supervisory Authority or by the SCCs), the Customer may audit IntelCAD's relevant processing, no more than once per 12 months unless a Personal Data Breach has occurred, on at least 30 days' written notice, during business hours, under confidentiality, with minimal disruption, and at the Customer's cost. The audit may not include access to other customers' data.

12. Return and Deletion

12.1 During the term, the Customer can access and export Customer Personal Data using the Services.

12.2 After termination or expiry of the Services, or on the Customer's instruction to delete data, IntelCAD will delete Customer Personal Data from its active systems within 30 days and from backups within 90 days, after the Customer has had at least 30 days to export it, except where a law requires longer retention. In that case IntelCAD will continue to protect the data and process it only for the purposes the law requires.

12.3 On request, IntelCAD will confirm deletion in writing.

13. Government and Third-Party Requests

If IntelCAD receives a legally binding request from a public authority for Customer Personal Data, it will, where lawful, notify the Customer promptly, redirect the authority to the Customer where possible, challenge requests that it reasonably considers unlawful or overbroad, and disclose only the minimum that is legally required.

14. CCPA Terms

To the extent the CCPA applies, IntelCAD acts as a service provider and will not: (a) sell or share Customer Personal Data; (b) retain, use, or disclose it for any purpose other than the business purposes specified in this DPA, or outside the direct business relationship with the Customer; or (c) combine it with personal information from other sources, except as the CCPA permits. IntelCAD certifies that it understands and will comply with these restrictions, and will notify the Customer if it can no longer meet its CCPA obligations.

15. Liability

Each Party's liability under or in connection with this DPA, including under the SCCs, is subject to the limitations and exclusions in Section 15 of the Terms, except where Applicable Data Protection Law or the SCCs do not allow such limits (including Data Subjects' rights to compensation under the SCCs).

16. Term and Precedence

16.1 This DPA takes effect when the Customer first uses the Services as a business or organization, or on the effective date of an order form that refers to it, and continues as long as IntelCAD processes Customer Personal Data.

16.2 If there is a conflict, the following order of precedence applies: (1) the SCCs and UK Addendum (where they apply); (2) this DPA; (3) the Terms and any order form; (4) the Privacy Policy.

16.3 This DPA is governed by the law stated in the Terms, except that the SCCs are governed as stated in Section 8.2. Section 17 of the Terms (Governing Law and Disputes) applies to disputes under this DPA, subject to any mandatory jurisdiction rules of the SCCs.

16.4 IntelCAD may update this DPA to reflect changes in law or in the Services, with at least 30 days' notice. If the Customer reasonably objects because the change materially reduces protection of Customer Personal Data, the Customer may terminate the affected Services under Section 7.2.

17. Contact

Data protection questions and notices under this DPA should be sent to:

IntelCad FZ-LLC (Licence no. 47035899, RAKEZ)
CWEP6703, Compass Building, Al Shohada Road, Al Hamra Industrial Zone-FZ, Ras Al Khaimah, United Arab Emirates

Privacy: bd@team.intelcad.ai
Security incidents: bd@team.intelcad.ai

Legal: bd@team.intelcad.ai


Annex I: Description of the Processing

A. Parties.

  • Data exporter (Controller): the Customer identified in the order form or account registration.
  • Data importer (Processor): IntelCad FZ-LLC, contact details in Section 17.

B. Subject matter. Provision of the IntelCAD electronics and hardware design platform, including AI-assisted design features, collaboration workspaces, and related support.

C. Nature and purpose. Hosting, storage, retrieval, display, transmission, backup, and deletion of Customer Personal Data; running AI features at the Customer's direction; providing support; and ensuring the security and availability of the Services.

D. Duration. The term of the Customer's use of the Services, plus the deletion periods in Section 12.

E. Categories of Data Subjects. The Customer's employees, contractors, collaborators, and invited workspace members; the Customer's customers or suppliers, to the extent they appear in design files, BOMs, or comments; other individuals whose data the Customer chooses to include in Your Content.

F. Categories of Personal Data. Names, business contact details, job titles, user identifiers, and comments or notes authored by individuals; authorship metadata and version history in design files; any other Personal Data the Customer includes in uploads or prompts. The Services are not designed to process special category data (such as health data or biometric data) and the Customer must not upload it.

G. Frequency of transfer. Continuous, for the duration of use.

H. Competent Supervisory Authority. The authority in the Member State where the Controller is established; for UK GDPR, the UK Information Commissioner's Office; for UAE PDPL, the UAE Data Office.

Annex II: Technical and Organizational Measures

AreaMeasures
Access controlRole-based access, least privilege, multi-factor authentication for staff, periodic access reviews, prompt revocation on role change or departure
AuthenticationPassword hashing with a modern algorithm (bcrypt), session management, email verification, and multi-factor authentication for users where we offer it
EncryptionEncryption in transit (TLS) and at rest for Customer Personal Data and backups
Logical separationCustomer workspaces are logically separated; Your Content is not used in shared libraries or other customers' workspaces
Staff access to contentLimited to defined situations, requires a documented business reason, recorded in audit logs
Monitoring and loggingSecurity logging, alerting for anomalous activity, retention of security logs for 12 months
Vulnerability managementRegular patching, dependency scanning, security testing, and a process for reporting vulnerabilities
Secure developmentCode review, separation of environments, secrets management, no production data in testing without safeguards
Backup and recoveryRegular backups, restoration testing, documented recovery procedures
Incident responseDocumented incident response plan, 72-hour customer notification commitment
Subprocessor managementDue diligence, written data protection terms, ongoing review
AI controlsNo training on Customer Personal Data; limited provider retention of no more than 30 days; provider access restricted to service delivery and abuse prevention
PersonnelConfidentiality obligations, data protection and security training
DeletionDeletion from active systems within 30 days and from backups within 90 days after account or project deletion, subject to Section 12

Annex III: Subprocessors

CategoryPurposeLocation of processing
Cloud hosting providerHosting, storage, and backup of the Services and Your ContentAs stated in the named list
AI model providersProcessing prompts and generating outputs for AI featuresAs stated in the named list
Payment processorPayment processing and invoicing (limited Personal Data; no design content)As stated in the named list
Email delivery serviceTransactional and service emailsAs stated in the named list
Analytics, support and error-monitoring tools (currently PostHog and Google Analytics)Product usage analytics (pseudonymized, no design content), support requests and error diagnostics, with design data excluded unless submitted by the CustomerAs stated in the named list

A named list of Subprocessors, with processing locations, is available at bd@team.intelcad.ai and is updated in line with Section 7.2.